ISSN (Online: 2321-5518, Print:2348–2885)
IMPACT FACTOR: 1.73; IC VALUE: 6.14

IJTEMT

Dr. K.M. Pandey

Dr. K.M. Pandey











Detailed Profile of Dr. K.M. Pandey

Name                                      :           Dr. Krishna Murari Pandey

Present Organization         :          
Dr. K M Pandey                                                  
Professor and Ex-Head
Ex-Dean, Faculty Welfare
Ex-Dean, Research and Consultancy
Department of Mechanical Engineering
National Institute of Technology, Silchar
Assam-788010, India

Nationality                             :           Indian.
Knowledge of Languages :     English, French and Hindi

Educational Qualification     :
Ph.D. (Mechanical Engg)                    IIT Kanpur, (1994)    
M. Tech. (Heat Power)                       BHUIT, Varanasi (1987)                    70%     1st Div.
B. Tech. (Mechanical Engg)               BHUIT, Varanasi (1980)                    65.9% 1st Div.
I.Sc.                                                     St. Xavier College, Ranchi (1975)      68%     1st Div.
Matriculation                                       Bihar S.S.E. Board, Patna (1973)       69.9% 1st Div.

 

Teaching Experience:
At. Birla Institute of Technology, Mesra, Ranchi in Mechanical Engg. Dept as Tutor cum Research Assistant from July 13, 1983 to Aug 1, 1983 on Rest. 900 p.m. consolidated. (20 days)
At Birla Institute of Technology, Mesra, and Ranchi in Mechanical Engg. Dept as Associate Lecturer in the scale of Rs. 650-900 from Aug 2, 1983 to Dec 31, 1986. (3 years 5 months)
At Regional Engineering College, Silchar in Mechanical Engg. Dept as Lecturer in the scale of Rs. 2,200-4,000 from Jan. 6, 1987 to Feb 14, 1991. (4 years 2 months)
At National Institute of Technology (formerly known as Regional Engineering College), Silchar in Mechanical Engg. Dept as Assistant Professor in the scale of Rs. 12,000-420-18,300, last basic pay Rs. 18,300 Since Feb 15, 1991 to 27-05-06.

Professor since 28-05-06 in the afternoon took charge of Head of the Department since 6 July 2007, worked as Head up to 13-07-2010. Taken charge of Dean, faculty affairs from November 2011 to April 2012. Since April 2012, Dean , Research and Consultancy up to 10th September 2012

Joined as Professor in mechanical engg. Department on 6-4-2010 in open category from CAS. Handed over the charge of Head on 14-7-2010 in the morning after completion of tenure of 3 years.
Joined CPSC Manila as seconded faculty member from Government of India since 3rd June 2002- 15th Jan 2003.
Position held at CPSC, Manila, Philippines: Faculty Consultant, Co-Chair, Research and Development, Colombo Plan Staff College for Technician Education, Building Block C, Deep Ed Complex, Meralco Avenue, Pasig City 1600, Philippines, Tel No:  632-631-0991 to 95, Fax No:  632-631-0996 (Seconded by Government of India).
Experience in Technician Education and Training:

  • Worked since June 3, 2002 in the area of technician education at CPSC Manila. Worked as co-coordinator for a regional training programme of Colombo Plan Staff College on strategic planning for management and policy making in technician education and training from July 29 - Aug 9, 2002. The participants for the course were principals, deputy secretaries and other policy makers. Presently engaged in designing other courses for future for 18 member countries of Colombo Plan.
  • Worked as co- coordinator in national consultation workshop held on Sept 9, 2002 at CPSC, Manila. Many presidents of universities of Philippines attended the workshop.
  • Worked as Co-Chairman of Research and Development in CPSC.
  • Attended a training programme on introduction to ISO 9001:2000, QMS Requirements, Edsa Shangri-La Plaza Hotel, Mandaluyong City. Metro Manila, Philippines, Sept 2, 2002.
  • Worked as coordinator of in-country programme on promoting and sustaining innovations in technician education and training, in collaboration with technical education and skills development authority (TESDA), Philippines from Sept 30 - Oct 11, 2002 at TESDA conference room, Taguig Metro Manila.
  • Worked as coordinator of in-country programme on competency based curricula development for service sector at Technical Teachers Training Institute, Chandigarh, India from Nov 11 - Nov 22, 2002.
  • Presently working at NIT- Silchar, Assam, and India since 21st Jan 2003.

Worked as resource person in the following training programmes of technical teachers involved       in graduate and postgraduate teaching and delivered lectures:

  • At IIT Kanpur in Dec 1991 delivered lecture on experimental methods in fluidised bed operations, winter school on experiments in fluids conducted in Aerospace Engineering Department.
  • At REC Silchar, Assam, India in July 2000 in induction training programme of technical teachers, delivered lecture on project proposal for establishment of micro hydel power plant at NIT Silchar.
  • K.M. Pandey, Designing a library staff compute training programme: A case study of central library of NIT Silchar, training programme on IT applications in information management: issues, trends and challenges, NIT Silchar, March 1-10, 2004, pp 78-93.
  • K.M. Pandey and V.K. Sinha, Impact of technology on library services: A case study of academic library in China, training programme on IT applications in information management: issues, trends and challenges, NIT Silchar, March 1-10, 2004, pp 94-103.
  • K.M.Pandey, Recent developments in technical education, Induction Training Programme, Jan. 05,NIT Silchar, Assam, India
  • K.M.Pandey, E-learning, Induction Training Programme, Jan. 05, NIT Silchar, Assam, India
  • K.M.Pandey, Base heating, National workshop on gas dynamics and applications, department of mechanical engineering, KL college of engg, Vaddeswaram, Distt. Guntur, Nov. 7-8, 2005 (A.P.)
  • K.M.Pandey, The effects of nozzle truncations, National workshop on gas dynamics and applications, department of mechanical engineering, KL College of engg, Vaddeswaram, Distt. Guntur, Nov. 7-8, 2005 (A.P.)
  • K.M.Pandey, The innovations in technical education, National workshop on gas dynamics and applications, department of mechanical engineering, KL College of engg, Vaddeswaram, Distt. Guntur, Nov. 7-8, 2005 (A.P.)
  • K.M.Pandey, Energy management of mini hydel power plants, workshop on research methodology in basic sciences, Assam University, Silchar, Assam, India, Nov. 13-17, 2006.
  • K.M.Pandey, Components and characteristics of a good research proposal, workshop on research methodology in basic sciences, Assam University, Silchar, Assam, India, and Nov. 13-17, 2006.

Research Interests-Dr Pandey has been serving as member of editorial board of many international journals and he is also reviewer of many International Journals.

  • Member, Editorial Board,  International Journal of Mechanical Engineering,  ISST International Journal of Mechanical Engineering, Intellectuals society for socio-techno welfare, B-401, Sawarnjayantipuram, Govindpuram, Ghaziabad-201003, UP India. Since January 2010.
  • Member, Advisory Board, The world academy of research in science and engineering.

 

  • Member, Chief Technical Advisory Board, IJEAT, International Journal of Engineering and Advanced Technology.
  • Member, Chief Technical Board, IJSCE, International Journal of Soft Computing and Engineering.

 

  • Member, Editorial Board, Asian Research Publication Network (ARPAN)  Journal of Engineering and Applies Sciences
  • Member, Editorial Board, Current Trends in Technology and Sciences

 

Worked as expert in the following selection committees-

1. Selection committee held on 14-06-2008 for selection of senior lecturer, selection grade lecturer and professor for mechanical engg. Dept. of NIT Silchar
2. Selection committee meeting held at BSA institute of technology at Mathura for selection of lecturer, Asst. Professor and Professor on 17-06-2008.
3. Selection committee meeting for lecturer, Assistant Professor and Professor at Pauri Engg. College, Pauri in November, 2009, Uttarakhand
4. Selection committee meeting for recruitment of Associate Professor and Assistant Professor for NIT Silchar in Kolkata in March 2009.
List of Courses Taught at Undergraduate Level:

  • Thermodynamics – 6 times taught
  • Heat Transfer-6 times
  • Prime Movers-6 times
  • Applied Thermodynamics-6 times
  • Gas Turbine and Jet Propulsion-3 times
  • Internal Combustion Engines-8 times
  • Refrigeration- 3 times
  • Air Conditioning-3 times
  • Fluid Mechanics-4 times
  • Turbo Machines –8 times
  • Power Plant Engineering-4 times
  • Gas Dynamics-3

List of Courses Taught at Postgraduate level

  1. Internal Combustion Engines- 4 times
  • Energy Management- 4 times
  • Numerical methods in fluid flow and heat transfer-4 times
  • Principles of combustion- 4 times.

Research Experience and Projects completed:

  • Worked in the area of Non-Conventional Energy since Jan 1995 on Development of Micro-Hydel Power Plants, an AICTE project of Rs. 5.7 lakhs (Completed).
  • Worked as a Coordinator in Modernization of Heat Transfer Laboratory, an MHRD Project of Rs. 9.0 lakhs since April 1998 (Completed).
  • Research stay at LSTM, Institute of Fluid Mechanics, Erlangen, Germany from 20 June to 20 July 2006.
  • Worked in a Nationally Co-ordinated Project as Co-investigator since Jan. 2009 on establishing an institute of excellence for advanced studies, training and research in mechanical engineering at lead institution IIT Guwahati. NIT Silchar and NERIST Itanagar are the two other participating institutions.
  • Extraction of pineapple fibres in Barak valley of Assam, 5 lacs from KVIC to be completed in October 2012.
  • Energy quality and productivity audit of KVIC works in Barak Valley region of Assam, 5 lacs from KVIC to be completed in October 2012.
  • Presented one project proposal to BARC, Mumbai on 13 th October 2012 onComputational studies on heat transfer from nulear rods-Project cost- about 25 lacs-likely to get it.

M.Tech. Thesis Topic- Studies on fluidization of large size coal particles at moderate temperatures.

Ph.D.  Topic: Studies on flow through nozzles with sudden expansion.
Research Area of Interest:
Numerical methods, Gas dynamics, Non-conventional energy power generation, Experimental techniques, Refrigeration and air conditioning, Education technology and Environmental pollution, Computational fluid dynamics using Fluent software.

M.Tech. and Ph.D Guidance- Guided 24 for M.Tech. And one for Ph.D, Dr.A.P.Singh.
Completed the responsibility of Chairman of Doctoral Committee of 4 Research Scholars, Agnimitra Biswas, Sanjay Kumar Dey, K.K.Sharma and M.S.Murthy , who received Ph.D in Mechanical Engineering from Department of Mechanical Engineering, NIT Silchar, Assam, India. Another student of Ph.D Col. Probhas Bose is to submit thesis by December first week.

Current Area of Research:
Education Technology, Air Pollution, Design of Micro hydel Power Plants, Computational and Experimental Fluid Mechanics and High Speed Flows, Human resource management.
Worked as reviewer for the following International Conferences

    1. International Association of Science and Technology for Development-USA, International Conference on Environmental modelling and Simulation (EMS 2004), St. Thomas, Virgin Islands, USA, November 22 to 24 2004-reviewed 2 papers for the conference.
    2. The International Association of Science and Technology for Development-USA, International Conference on Power and Energy Systems (PES 2004), Clearwater Beach, Florida, USA, November 28 to December 01 2004-reviewed 3 papers for the conference
    3. The International Association of Science and Technology for Development, International Conference on Energy and Power Systems (EPS 2005), Krabi, Thailand, April 18 –20, 2005-reviewed 3 papers for the conference
    4. The International Association of Science and Technology for Development, International Conference on Power and Energy Systems (EuroPES 2004), Benalmadena, Spain, June 15-17, 2005-reviewed 2 papers for the conference
    5. The International Association of Science and Technology for Development, International Conference on Applied Modelling and Simulation (ASM), Benalmadena, Spain, June 15-17, 2005-reviewed 1 paper for the conference
    6. The International Association of Science and Technology for Development, The 15 th International Conference on Applied Modelling and Simulation (ASM), Rhodes, Greece, June 26-28, 2006reviewed 1 paper for the conference
    7. The International Association of Science and Technology for Development, International Conference on Energy and Power Systems (EPS 2006), Chiang Mai, Thailand, March29-31, 2006-reviewed 1 paper for the conference
    8.  The International Association of Science and Technology for Development, International Conference on Power and Energy Systems (PES 2007), Clearwater beach, Florida, USA, Jan. 3-5, 2007-reviewed 6 papers for the conference.
    9. The 18th International Association of Science and Technology for Development, International Conference on Modelling and Simulation (MS 2007), Montreal, Quebec, Canada, May 30-June 01, 2007-reviewed 2 papers for the conference.
    10.  The International Association of Science and Technology for Development, International Conference on Modern Non-linear Theory- Bifurcation and Chaos (MNT 2007), Montreal, Quebec, Canada, May 30-June 01, 2007-reviewed 1 paper for the conference.
    11.  Reviewed 4 papers for modelling, simulation and identification in August 2009, international conference at Beijing, China, October 12-14, 2009 organised by IASTED.
    12.  Reviewed 2 papers for the international conference on applied simulation and modelling, at Palma de Mallorca in Spain from September 07-09 2009 organised by IASTED.
    13.  Reviewed 5 papers for the international conference on applied simulation and modelling, on June22-24, 2011
      Crete, Greece Organised by IASTED in March 2011.
    14.  Journal of Research in International Business and Management (Formerly, International Research Journal of Management and Business Studies)
      on 8-9-2011.
    15.  Reviewed a paper of the International Journal Education Research –ER-11-386 of interesjournals On 9-9-2011.
    1.  Reviewed one paper of 11th AICFM (Asian International Conference on Fluid Machinery) and 3rd EMCHAFT, to be held at IIT Madras, Chennai from November 21-23, 2011 in August 2011.
    2.   Reviewed one paper for the International Journal of Environmental Engineering, an International Journal of Science Journal Publications in March 2011.
On Machine Learning   and Computing, Singapore, February 26-28, 2011, VIP-ICMLC-C00993.
    1.  Program Chair, ICMLC 2011 Singapore,   2011 3rd International Conference On Machine Learning   and Computing, Singapore, February 26-28, 2011.
    1.  Reviewed one paper of African Journal of Microbiology Research, paper no-AJMR-10-466.
    1.  Reviewed one paper of African Journal of Agricultural Research, paper no-AJAR-10-822.
22. Reviewed one paper JETR-10-007 from academicjournals JETR. ISSN 2006-9790
23. Reviewed 3 papers of JERAD in July 2010,617, 726-T-H, 1248-T in August 2010.
24. Reviewed one paper SRE-10-472, for International Journal Scientific Research and        
Essays of academicjournals.org.
25. Reviewed one paper for Journal of Mechanical Science and Technology, Springer              Publications
26. Reviewed one paper for IMECE2010, 2011 ASME International Mechanical Engineering Congress and Exposition, November 11-17, 2011, Denver, Colorado, USA (IMECE 2011-62310).
27. Reviewed one paper for the 11th Asian International Conference on Fluid Machinery and the 3rd    Fluid Power Technology Exhibition. Paper ID: AICFM_ES_001, November 21-23, 2011, Department of Mechanical Engineering IIT Madras, Chennai, India.
28. Reviewed one paper for the international Journal Educational Research, paper n0-ER-12-010 on 16 January 2012.
29. Reviewed one paper for the international Journal Educational Research, paper No.-ER-12-013 on 23 January 2012.
30. Reviewed one journal paper of IJET T858 on 1st December 2011.
Chairing of technical session in the conferences-

1. Chaired a Technical Session in International conference on Energy and Environment, March 19-21, Taj Chandigarh, Chandigarh, India PP 778-780. Published online on World Academy of Science, Engineering and Technology, Volume 39, March 2009, ISSN 2070-3740.

 

2.  Chaired a Technical Session in 36 th National Conference on Fluid Mechanics and Fluid Power, Department of Mechanical Engineering, College of Engineering Pune, Maharashtra,   December 17-19, 2009.

     
3. Organised one National Conference and had been chairman of the Conference on Recent Advances in Mechanical Engineering, Department of Mechanical Engineering, NIT Silchar, Assam, and December 20-21, 2009.

4. Key note speaker for the second International Conference on Machine Learning and Computing, Feb.9-10, 2010, (ICMLC 2010), Royal Orchid, RAMADA, Bangalore.

  • Chair, Technical Session in for the second International Conference on Machine Learning and Computing, Feb.9-10, 2010, (ICMLC 2010), Royal Orchid, RAMADA, Bangalore.

 

  • Session coordinator, 3rd International Congress of Environmental Research, September16-18, 2010, University of Mauritius, Reduit, Mauritius. Chaired a session of Technology on 16, 2 nd Technical Session.
  • Chaired a technical session in  IMECE2011, 2011 ASME International Mechanical Engineering Congress and Exposition, November 11-17, 2011, Denver, USA
  1. Chaired a technical session on 22 November 2011 in the 11th  Asian International Conference on Fluid Machinery and the  3rd    Fluid  Power  Technology  November  21-23,  2011,Department of Mechanical Engineering,  IIT  Madras,  Chennai,  India.
  2. Chaired a technical session in ICER-11 in December 2011 at NIT Surat.
  3. Chaired a technical session in NITTR Chandigarh during March-15-16, 2012 in a national conference on recent advances in Manufacturing Technology.
  4. Key note speaker in ICER-12, ICER-12, 5th International Congress of Environmental Research, 22-24 November, 2012, Centre for Socioeconomic Development, Universiti Malaysia Terengganu (UMT)., 21030,  KUALA TERENGGANU, TERENGGANU (MALAYSIA).
  5. Session Chair, ICER-12, 5th International Congress of Environmental Research, 22-24 November, 2012, Centre for Socioeconomic Development, Universiti Malaysia Terengganu (UMT)., 21030,  KUALA TERENGGANU, TERENGGANU (MALAYSIA).
  6. Co-ordinator, ICER-12, 5th International Congress of Environmental Research, 22-24 November, 2012, Centre for Socioeconomic Development, Universiti Malaysia Terengganu (UMT)., 21030,  KUALA TERENGGANU, TERENGGANU (MALAYSIA).
  7. Reviewer for ICER-12, ICER-12, 5th International Congress of Environmental Research, 22-24 November, 2012, Centre for Socioeconomic Development, Universiti Malaysia Terengganu (UMT)., 21030,  KUALA TERENGGANU, TERENGGANU (MALAYSIA).
  8. Reviewer for ASME HEAT TRANSFER SUMMER INTERNATIONAL CONFERENCE July 2013, reviewed two papers July 14-19, Minneapolis,MN, USA.
  9. Written a chapter of book on Nanotechnology, Vol.5 Defence Applications, Recent advances in nanomaterials of defence applications, Chapter 3 PP 35-53,

Series Title         : NANTOTECHNOLOGY, Series ISBN          : 1-62699-000-X, Volume No. and Title : Vol.5: Defence Application, Volume (5) ISBN      : 1-62699-005-0, Executive Editor     : Dr. J.N. Govil, Volume Editors       : Dr. Shishir Sinha and Dr. Naveen K.   Navani     ,  Publisher  : Studium Press LLC,   P.O. Box 722 200, Houston, TX 77072-     USA

 

 

Additional Academic Activities:

  • Member, Technical Committee, International Conference on Mechanical Engineering, Robotics and aerospace, ICMERAS 2010, December 2-4-2010, Bucharest, Romania (By IACSIT and IEEE).

 

  • Senior Member, International Association of Computer Science and Information Technology, IACSIT Singapore, Membership Number-80338108
  • Chair, Program Committee, 3rd International Conference on Machine Learning and Computing, February, 2011, Singapore

 

  • Member, Technical Committee, International Conference on Mechanical and Aerospace Engineering (CMAE 2011) New Delhi, India, March 19-20, 2011.
  • Member, Technical Committee, International Conference on Control, Robotics and Cybernetics (ICCRC 2011) March 19-20, 2011, New Delhi, India.

 

  • Member, Technical Committee, International Conference on Computer Communication and Management (ICCCM 2011), Sydney, Australia, May 2011.
  • Member, Technical Committee, 2011, International Conference on Traffic and Logistics Engineering (ICTLE 2011), Chennai, India, April 2011.

 

  • Member, American Society of Mechanical Engineers, No. 100083085 since 2010
  • Reviewer, Journal of environmental research and development since 2010

 

  • Fellow of Journal of Environmental Research and Development, an International Journal (F/638/2010).
  • Reviewer for the ASME international conference to be held in Canada in 2010 reviewed. Reviewed one paper in September 2010.
  • Member, Editorial Board,  International Journal of Mechanical Engineering,  ISST International Journal of Mechanical Engineering, Intellectuals society for socio-techno welfare, B-401, Sawarnjayantipuram, Govindpuram, Ghaziabad-201003, UP India. Since January 2010.
  • Member, Advisory Board, The world academy of research in science and engineering.
  • Member, chief technical advisory board, IJEAT, International Journal of Engineering and Advanced Technology.
  • Member, Chief Technical Board, IJSCE, International Journal of Soft Computing and Engineering.

List of M.Tech. and Ph. D students guided

Serial No.

 

 

1.

 

2.

 

3.

 

 

4.

 

5.

 

6

 

 

7.

 

 

8.

 

9.

 

10.

 

11.

 

 

 

12.

 

13.

 

 

14.

 

15.

 

 

16.

 

 

17.

 

18.

 

19.

 

20.

 

 

21

 

 

22

 

 

 

23

 

 

 

24

 

 

25

 

 

26

 

 

 

27

 

 

28

 

29

 

 

30

 

 

 

Serial No.

1

 

 

 

2.

 

 

3.

 

4

 

 

 

5

 

 

 

6

 

 

7

Name of the student

 

 

Ramanuj Deb

 

M. Mahesh

 

Mukul Ray

 

 

Amrit Sarkar

 

Kaushik Deb

 

A.P.Singh

 

 

Bikramjeet Achrya

 

Virendra Kumar

 

Surendra Kumar Yadav

 

Amitabha Roy

 

Subodh Deb Verma

 

 

S.N.Pandey

 

Ravindra Kumar

 

Bidesh Roy

 

K. K. Siva Kumar Reddy

 

 

T. Sivasakthivel

 

Surya Kumar

 

Oveepsa Chakraborthy

N.Pradeep Kumar

 

Sujoy Chakraborthy

 

Nabarun Biswas

 

 

J.P.Kalita

 

 

 

Sukanta Roga

 

 

 

Kamalashish Deb

 

K.O. Reddy

 

 

Deepak Sharma

 

 

Ajoy Debbarma

 

Ravindra Kannojiya

 

Sunita Deb

 

 

Binita Nath

 

 

 

Name of the
research scholar

Probhas Bose
part Time

 

 

 

A.P.Singh
Full Time

 

 

Bidesh Roy
Part Time

 

Abhijit Sinha
Full Time

 

 

Pinku Debnath

 

 

 

Sukant Roga

 

 

Saroj Yadav

Title of thesis

 

 

Thermo economic optimization of an irreversible solar driven heat engine.

Temperature distribution in a work roll in cold rolling process.

Studies on hydrodynamics and heat transfer characteristics in a circulating fluidized bed.

Computational thermal analysis of a nuclear fuel                    element.

Study of noise pollution in I.C. Engines

Supersonic flow Through De Laval nozzle With Sudden expansion with Fluent Software. A computational Analysis

Modelling species transport and gaseous combustion: A numerical analysis with Fluent software

Studies on Free jet flows; an analysis with fluent software

Studies on rocket nozzles with fluent software

Modeling of combustion process in turbojet engines: an analysis with fluent software

Computational Analysis of Noise Pollution from internal Combustion engines

CFD Analysis of combustion of methane at high speed inlet with and without bluff body by using Fluent software

Studies on coal combustion in circulating fluidized bed using C F D analysis

Design of S.I engine intake valve for high level of intake swirl generation using C F D.

Numerical simulation of flow and heat transfer in combustion chamber of rocket engines

Studies on developments of rocket engines

 

Numerical analysis of flow through gas turbines

Numerical analysis of Supersonic Combustion

Unsteady analysis of thin film lubrication in journal bearings.

Numerical Analysis of Performance of Centrifugal Pumps

 

Unsteady Analysis of Multilobe Bearings

 

 

Numerical analysis of cavity based inclined injector with non-premixed combustion model in supersonic flow regime

Numerical analysis of supersonic combustion with diamond shaped strut injector using  non-premixed combustion model

Numerical analysis of ramp based inclined injector with non-premixed combustion model in supersonic flow regime

3D Computational studies on star shape grain geometry solid fuel combustion

Studies on 3d cfd steady state heat transfer in nuclear fuel rods for sub channels of carbon dioxide flow at a pressure above the critical value

CFD analysis of flow & heat transfer in sub channel of high performance reactor with light water as coolant

Studies on power generation from wind turbine

2D Computational studies on cylindrical shape grain geometry solid fuel combustion

Numerical analysis of supersonic combustion with diamond shaped strut injector using  non-premixed combustion model at Mach 4 and 5.

 

 

Investigation Of Ballistic, Combustion Characteristics And Physical Properties Of Solid Composite Propellant For Multi Barrel Rocket Launcher

 

Numerical investigation of combustion chamber for supersonic and hypersonic flow regimes

 

Computational Studies on  Combustion Phenomena in I.C Engines

Studies on Tea Industries in North East India

Studies on  Pulse Detonation Engine Using Computational Fluid Dynamics

 

 

Numerical analysis of supersonic combustion with kerosene as fuel using  non-premixed combustion model

Numerical analysis of supersonic combustion with liquid  fuel using  non-premixed combustion model

 

 

Master's level

 

 

M. Tech

 

M. Tech

 

M. Tech

 

M. Tech

M. Tech

 

 

M. Tech

 

M. Tech

 

M. Tech

 

M. Tech

 

M. Tech

 

M. Tech

 

M. Tech

 

 

M. Tech

 

M. Tech

 

M. Tech

 

M. Tech

 

M. Tech

 

M. Tech

 

M. Tech

 

M.Tech

M.Tech.

 

M.Tech

 

M.Tech

 

 

M.Tech

 

M.Tech

 

M.Tech

 

 

M.Tech

 

 

 

 

 

M.Tech

 

 

 

 

M.Tech

 

 

M.Tech

 

 

 

M.Tech

 

 

M.Tech

 

M.Tech

 

 

M.Tech

 

 

 

Doctoral Level

Ph.D

Part Time

 

 

Ph.D
Full Time

 

 

Ph.D

 

Ph.D

 

 

Ph.D

 

 

 

Ph.D

 

 

 

Ph.D

 

Year of completion

 

 

2006

 

2006

 

2006

 

2007

2007

 

 

2008

 

2008

 

2009

 

2009

 

2009

 

2009

 

2010

 

 

2010

 

2010

 

2010

 

2010

 

2010

 

2010

 

2011

 

2011

 

2011

 

2011

 

2011

 

 

2011

 

2011

 

Year of completion

 

June 2012

 

 

 

June 2012

 

 

June 2012

 

 

 

 

June 2013

 

 

June 2013

 

 

 

June 2013

 

 

June 2013

 

June 2013

 

 

June 2013

 

 

 

Year of completion

Registered in Aug2008

 

 

 

Completed on 4th  June 2012

.
Registered in July 2011

Registered in July 2011

 

Registered in July 2012

 

Registered in July 2012

 

 

 

Registered in Jan. 2013

Co-guide(s) if any

 

 

 

 

 

 

 

Dr. U. Kumar

 

 

 

Mr. D.H. Das

 

 

 

Mr. D.H. Das

 

Dr. U. Kumar

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Mr.P.L.Choudhury

 

Dr.Dilip Dutta

 

Dr.A.C.Paul
Co-guide(s) if any

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Final submission seminar over on 31/01/2013 Thesis Submitted 08/01/2013

 

 

 

 

Dr. R.D. Misra

 

Dr. Rajat Gupta

 

 

 

Additional Responsibilities:

  • Worked as member of technical committee for International Association for Development of Science and Technology (IASTED) for International Conference on Power and Energy Systems (PES 2004) held in Florida, USA and also for EMS 2004 held in USA. The assignment is for a period of 4 years. Also worked for the conference to be held in Krabi, Thailand for EPS 2005.
  • Member of Technical Committee of IASTED for the international conferences on power and energy systems 2005-2008.
  • Worked as observer in All India Engineering Entrance Examination conducted by Central Board of Secondary education, New Delhi in the year 2003, 2004 and in 2005 at Guwahati, Itanagar and Aizawl.
  • Worked as member of admission committee at NIT Silchar, in the year 1988 and 2002.
  • Worked as assistant warden and warden at NIT Silchar in the year 1988 and 2002.
  • Member of Senate of NIT Silchar
  • C0-ordinator of Departmental Post Graduate Programme Committee
  • Chairman of Departmental Purchase Committee since 2004 –2007
  • Head, department of Mechanical Engineering, NIT Silchar. Since 6 July 2008-13July2010.
  • Member, Board of Governors of NIT Silchar since February, 2009 to June 2011.

Paper Publications:
International Journals: 80 papers, 5 communicated.

International Conferences- 99.

National Conferences-: 82.

Books: 2

  • Programmed Book entitled “ Promoting and Sustaining Innovations in Technician  Education and Training” (167 pages), Programmed Conducted in Manila, Philippines
  • Programmed Book entitled “Development of Competency- Based Curricula and Instructional Material for Service Sector (162 pages), Programmed conducted at Rural   Development Department, Technical teachers training institute, Chandigarh.

 

Chapters of books written-

  • Chapter 17,Human resource practices in private sector: a case study of Cadtrium engineering solution Pvt. Ltd. Gurgaon PP.169-185,  in the book entitled Research in management and technology by Dr.Aneet and Ramanjeet Singh, copyright 2008, Gyan Jyoti Institute of Management and Technology, Mohali, Chandigarh. This book is published by Deep and Deep Publications, New Delhi in the year 2008, Price Rs. 2800.

 

  • Reviewed a book on Mechanics of Materials in SI units by Ferdinand P. Beer, E.Russel Johnston Jr. and John T Dewolf adapted by N.Shiva Prasad, Tata McGraw-Hill Publishing Company Limited. In 2008.

Life Membership:

    • Indian Society for Technical Education, India (LM 9840).
    • Fluid Mechanics and Fluid Power Society of India (LM-155).
    • Professional member of American Society of Mechanical Engineers (ASME) and membership number is 100083085.
    • Member of Technical Committee on Power and Energy Systems, International Association Development of Science and Technology (IASTED) for the period 2005-08 Website-www.iasted.org
    • Senior Member, International Association of Computer Science and Information Technology, IACSIT, Membership Number-80338108
    • Member of technical committee for IASTED International conference on modelling and simulation for the period from 2008-2011.
    • Reviewed 4 papers for IASTED Conference on Modelling and Simulation at Banff, Canada from 6-8 July 2009.
    • Reviewed a paper JETR-2010-007 in August, 2010, Journal of Engineering and Technology and Research. Published from Nairobi and Victoria Island, Lagos.
    • Reviewed a paper SRE-10-472, Scientific Research and Essays
    • On 21/6/2010, I reviewed one ASME Intl. Conference Paper IMECE2010-39653.
    • T-617/09, T-726/2009, T-1248/09, for Journal of Environmental Research and Development (JERAD), an International Journal Published from Bhopal.
    • Fellow of the International Journal JERAD published from Bhopal, India.
    • Reviewed a paper of International Journal of Environmental Engineering, Science Journal Publications

List of summer / Winter School Attended:

  • Training programme on “Energy System Engg” at Mech. Engg. Dept, REC Kurukshtra from June 22 - July 4, 1987.
  • Training programme on “Emerging Trends in Energy Conversion Systems” at Mech. Engg. Dept Govt. Engg. College Ujjain from Dec 17-30, 1987.
  • Training programme on “Computer Aided Design of Renewable Energy Devices and Equipment” at PGS College of Technology Coimbatore from June 12-25, 1988.
  • Training programme on “Welding Technology, Basic Concepts and Advances” at Mech. Engg. Dept REC Silchar from May 22 - June 3, 1989.
  • Training programme on “Experiments on Fluid” at Aerospace Engg. Dept, IIT Kanpur from Dec 10-24, 1991.
  • Training programme on “Industry Institute Partnership” at REC Silchar, Assam from May 28-May 30, 1994.
  • Management capacity development training by EQUATE at NIT Silchar, 26-09-08 to 30-09-08.    

Fellowships:

  • National Scholarship in I.Sc. (1973-75) and Merit cum Means Scholarship during B.Tech. Periods at BHU IT Varanasi (1975-80) for getting all India rank of 1018 in JEE of 1975.
  • The SERC Visiting Fellowship from DST, Govt of India, to work in the area of Turbo Machinery at IISc Bangalore in 1999 for a period of three months.


 

Submit Paper | Please Submit your Paper Here